- Startseite
- Tube Laser Cutting Machine
- MZ Pipe Laser Cutter
MZ Pipe Laser Cutter
Are you in need of a pipe laser cutter that can get the job done quickly and efficiently? Look no further than MZ Pipe Laser Cutter. Our tube laser cutting machine is specially designed to cut through pipes quickly and easily.
Here at MZ Pipe Laser Cutter, we understand that time is of the essence when it comes to projects. That’s why we’ve designed our pipe laser cutter to be as fast and efficient as possible. With our machine, you’ll be able to get the job done in no time!
If you’re looking for a reliable and affordable pipe laser cutter, then look no further than MZ Pipe Laser Cutter. Our machine is specially designed to get the job done quickly and efficiently. Contact us today to learn more!
Technical Parameters
| Maximum cutting length | ≤6000mm |
| Maximum weight for each tube | 120kg |
| Cutting diameter | 15-120mm O.D. |
| Rotary speed | 180rpm |
| X.Y.Z axis position accuracy | ±0.05mm/m |
| Minimum tailing | 100mm |
| Maximum running speed | 100m/min |
| Power supply | 380V/50Hz |
Components
Merkmal
The main components of the product
The main components of MZ series fiber optic pipe cutting machine are: machine tool mainframe, control system, laser, water chiller, extractor fan, etc.
2.1 Machine tool host part
The host part of the machine is the main component of the fiber optic pipe cutting machine, fiber optic pipe cutting machine cutting function and cutting accuracy are achieved by the host part, the host part consists of the bed and the front chuck, rear chuck, beam and x-axis device, z-axis device, laser head, reducer wheel bracket device, auxiliary systems (lubrication, air and water), electronic control cabinet, operation screen, operation panel and other parts.
Electrical control part
Fiber optic pipe cutting machine electrical control system is an important part to ensure the operation of various graphics trajectory, the electrical control system is mainly composed of CNC system and low-voltage electrical system.
The machine tool CNC system configuration high-performance CNC system, the system is based on windows operating platform, stable and reliable operation, containing 32-bit microprocessor; the system has a fast interpolation operation speed, easy to operate, good dynamic performance, strong load capacity and other characteristics.
Low-voltage electrical system
The low-voltage electrical system is located in the electric control cabinet, which is the interface part of the electrical control of the whole machine. All the original components of the electrical system are made by famous manufacturers at home and abroad to ensure that the machine is stable, reliable and responsive in operation. The drive motor is AC servo motor, AC servo motor for driving the machine tool X axis, Y axis, characterized by good acceleration performance, fast response speed, X,Y axis maximum positioning speed up to 95m/min; machine tool Z axis for the feed axis, using AC servo motor (with holding brake) drive: that is, Z axis cutting head, characterized by good dynamic response characteristics, both with the control and NC control.
Auxiliary peripheral equipment
Including water chiller, exhaust system, etc.
Bed part
The bed is made of welded tubes, annealed to eliminate internal stress, and finished by vibration aging after rough machining, thus greatly improving the rigidity and stability of the machine tool and ensuring the accuracy of the machine tool. The Y-axis rack and linear guide are made of high precision products, which effectively ensure the accuracy of the transmission; the limit switch control at both ends of the stroke and the hard limit device are equipped, which effectively ensure the safety of the machine movement; the main machine is equipped with automatic lubrication device, which adds lubricant to the moving parts of the bed at regular and quantitative intervals. The main machine is equipped with automatic lubrication device, which can add lubricating oil to the moving parts of the bed regularly and quantitatively to ensure that the moving parts run in good condition, which can improve the service life of guide rails, gears and rack.
Crossbeam and X-axis and Z-axis devices
The crossbeam is annealed to eliminate internal stress, rough machining, vibration aging and then finishing to ensure the rigidity and stability of the moving parts of the laser head. x-axis and z-axis are driven by high precision modules, in the process of movement, the limit switch controls the travel to limit, and at the same time there are elastic cushion mechanical limit at both ends to ensure the safety of the system operation.
Z-axis device is mainly to achieve the up and down movement of the laser head. The up and down movement of the laser head is controlled by the CNC system servo motor, which drives the linear module to drive the Z-axis slide plate up and down reciprocating motion to complete. The upper and lower ends are controlled by proximity switches to ensure the safety and reliability of the movement.
Electrical control system
The electrical control system of MZ series fiber optic pipe cutting machine is mainly composed of Pachu CNC system, servo system and low voltage electrical system. The laser cutting machine is equipped with high performance Pachu CNC system, which is a WINDOWS-based PC CNC system with fast interpolation and easy operation; the servo system is an imported AC servo motor and driver, which is stable and reliable, with good dynamic performance, strong load carrying capacity and easy operation. The machine operation soft keys can have different functions in different operation modes, thus reducing the operation buttons and simplifying the operation panel. The operation functions are displayed by menus in various ways, making the operation intuitive.
cutting effect
frequently asked question
Do you have CE? We provide you with CE in the form of a one-stop service. At first, we will demonstrate CE to you. After delivery, we will give you CE packaging list a commercial invoice for customs clearance.
Please tell us about your following answer, our specialist will provide advice on proper power. 1. What material you want to cut, stainless steel, carbon steel or other? 2. What thickness do you want to cut?
If confronted with any problems, please contact us immediately and do not attempt to fix the machine by yourself or anyone else. We will respond within 24 hours as quickly as we can to help you.
2 years quality guaranty, the machine with main parts(excluding the consumables) shall be changed free of charge(some parts will be maintained) when if any problem during the warranty period.
Yes, we are happy to provide advice and we have dedicated technicians all around the world who are ready to assist you. Your operations’ continued success relies on your machines staying in working order.
Nachricht hinterlassen und die Antwort erhalten
Um die Benutzererfahrung zu verbessern und unsere Produktionstechnologie zu verbessern, sammelt JQ Laser reale Fragen und Kommentare aus dem Markt, die wir analysieren und beantworten werden, und wir werden auch die günstigen Produktionsideen übernehmen.
You may be interested in
