- Inicio
- Tube Laser Cutting Machine
- M3 Tube Laser Cutter
M3 Tube Laser Cutting machine
At JQ Laser, we produce the M3 tube laser cutter, a machine that is Revolutionising the way that tubes are cut. This machine uses a laser to cut tubes with speed, precision and flexibility that other machines simply cannot match.
The M3 tube laser cutter is changing the game for manufacturers who need to cut tubes quickly and accurately. With this machine, you can cut tubes of any size and shape with ease, making your production line more efficient than ever before.
If you’re looking for a machine that can help you cut tubes faster and more efficiently, the M3 tube laser cutter is the perfect solution. Contact JQ Laser today to learn more about this game-changing machine.
Technical Parameters
| Maximum cutting length | ≤6000mm |
| Maximum weight for each tube | 250kg |
| Cutting diameter | 15-230mm O.D. |
| Rotary speed | 150rpm |
| X.Y.Z axis position accuracy | ±0.05mm/m |
| Minimum tailing | 100mm |
| Maximum running speed | 100m/min |
| Power supply | 380V/50Hz |
Components
machine bed
The machine bed is made of stacked welded one-piece bed tube thickness 12-16mm, made by Italian Gauga machining center. After annealing to eliminate internal stress treatment, rough machining, vibration aging and then finishing, thus greatly improving the rigidity and stability of the machine tool and ensuring the accuracy of the machine tool.
loading frame
The loading frame is composed of storage lifting device, horizontal conveying device, pressing device, blocking material lifting device, patting material measuring device, clamping claw loading device and other components. It can realize the bundle of pipes into the storage basket at one time, and the pipes are automatically lifted and loaded. Adjustable front blocking device can ensure that only one pipe is loaded at a time.
Auto-focusing plane cutting head
Power level: 3300W
Auto-focusing.
– Range: +10~-12mm
– Acceleration: ≤10m/s²
– Speed: ≤10m/min
– Accuracy: ≤50μm
Focal length of collimating mirror: 100mm
Focusing mirror focal length: 125mm, 155mm, 200mm
Nozzle hole specifications: single-layer, double-layer, non-standard
Fiber interface: QBH, QD
Nozzle aperture: a variety of optional
Protective lenses.
– Collimation protection lens: φ24.9mm*1.5mm
– Focusing protection mirror: φ27.9mm*4.1mm
Auxiliary gas pressure: ≤30bar Weight: ~5.7kg
Chuck
Pneumatic chuck, fast clamping speed
Fully enclosed design, effective dustproof, easy maintenance
Full stroke chuck 15-230mm without jaw position adjustment, easy to use
Minimum tailstock 90mm, improve tube utilization
Double roller design, clamping small tubes more stable
Gear and rack drive, long life, high stability, low noise
Follow-Up Front Splice
20mm cast aluminum parts, strong impact resistance, can support heavy pipes
Stainless steel plate attached to the top, beautiful, not scratching the tube
Servo cylinder drive, precise follower + fast flip
Trailer support
Industrial nylon material, resistant to wear and tear, long life
High precision production, support adjustable tube diameter, more accurate
Pneumatic cylinder lift, fast speed
The TubesT tube nesting software
The TubesT tube nesting software is a set of nesting software for the CNC tube cutting system of Bertrud CypTube/TubePro.
Air compressor for fiber optic cutting
Equipped with cold dryer, multi-stage filtration, pure gas
Gas storage tank + compressor, stable airflow
Thin tube air cutting, reduce production cost
Smoke filter
Special structural design, small body size, low operation noise, and movable.
Adopting special aluminum alloy impeller and Siemens three-phase motor, combining negative pressure and flow; stable operation, low failure rate and continuous operation.
Set up the main switch of power supply, electric control components with thermal overload protection, phase loss and phase sequence protection, high safety, and can realize remote control and linkage control and other functions.
Fire stop device is set at the air inlet to place sparks in direct contact with the filter cartridge and damage it.
Pulse back-blowing device, good dust cleaning effect.
Special air duct and noise reduction design to reduce the noise of the machine outlet.
cutting effect
Photos of successful installation
frequently asked question
Do you have CE? We provide you with CE in the form of a one-stop service. At first, we will demonstrate CE to you. After delivery, we will give you CE packaging list a commercial invoice for customs clearance.
Please tell us about your following answer, our specialist will provide advice on proper power. 1. What material you want to cut, stainless steel, carbon steel or other? 2. What thickness do you want to cut?
If confronted with any problems, please contact us immediately and do not attempt to fix the machine by yourself or anyone else. We will respond within 24 hours as quickly as we can to help you.
2 years quality guaranty, the machine with main parts(excluding the consumables) shall be changed free of charge(some parts will be maintained) when if any problem during the warranty period.
Yes, we are happy to provide advice and we have dedicated technicians all around the world who are ready to assist you. Your operations’ continued success relies on your machines staying in working order.
Leave Message And Get The Answer
In order to improve the user experience and improve our production technology, JQ laser has been collecting real machinery handling questions and comments from the market, which we will analyze and provide answers to, and we will also adopt the favorable production ideas.
You may be interested in
