- Accueil
- Tube Laser Cutting Machine
- MN Pipe Laser Cutter
MN Pipe Laser Cutter
Our machine is designed for both small and large businesses. It offers a versatile, yet affordable solution for those who need to cut pipes quickly and efficiently.
Our MN Pipe Laser Cutter tube laser cutting machine is easy to use, thanks to its intuitive controls and user-friendly interface. Plus, it’s backed by our world-class customer support team.
So if you’re looking for the best pipe laser cutter on the market, look no further than the MN Pipe Laser Cutter tube laser cutting machine. Contact us today to learn more about our product or to place an order.
Technical Parameters
| Maximum cutting length | ≤6000mm |
| Maximum weight for each tube | 120kg |
| Cutting diameter | 15-120mm O.D. |
| Rotary speed | 180rpm |
| X.Y.Z axis position accuracy | ±0.05mm/m |
| Minimum tailing | 100mm |
| Maximum running speed | 100m/min |
| Power supply | 380V/50Hz |
Components
Fonctionnalité
· The loading frame
The loading frame is composed of storage lifting device, horizontal conveying device, pressing device, blocking material lifting device, patting material measuring device, clamping claw loading device and other components. It can realize the bundle of pipes into the storage basket at one time, and the pipes are automatically lifted and loaded. Adjustable front blocking device can ensure that only one pipe is loaded at a time.
· Optical characteristics Average output power:
( W ): 3000 Center wavelength: ( nm ): 1080±5 Maximum modulation frequency: ( kHz ): 5 Output power stability: ±1.5% Output characteristics Output connector: QBH (customizable) Beam quality M²: 5-7 (50μm) Polarization state: random Output fiber length (m): 20 (customizable) Other characteristics Dimensions ( mm ) width * height * depth: 485 * 900 * 237 (including handle) weight (kg): <80 cooling method: water-cooled operating temperature ( ℃ ): 10 – 40
·Auto-focusing plane cutting head Power level:
3300W Auto-focusing. – Range: +10~-12mm – Acceleration: ≤10m/s² – Speed: ≤10m/min – Accuracy: ≤50μm Focal length of collimating mirror: 100mm Focusing mirror focal length: 125mm, 155mm, 200mm Nozzle hole specifications: single-layer, double-layer, non-standard Fiber interface: QBH, QD Nozzle aperture: a variety of optional Protective lenses. – Collimation protection lens: φ24.9mm*1.5mm – Focusing protection mirror: φ27.9mm*4.1mm Auxiliary gas pressure: ≤30bar Weight: ~5.7kg
· Specially developed for laser equipment,
perfectly suitable for various brands of lasers Stable and reliable performance, low failure rate With linkage signal protection laser
· Chucks
Pneumatic chuck, fast clamping speed Automatic centering, saving time and effort The shortest tail material 90mm, improve the utilization rate of the tube Double roller design, clamping small tubes more stable
· Control system
FSCUT3000S is a control system developed for tube processing, supporting high precision and high efficiency cutting of square, round, runway and oval shaped stretch tubes as well as angles and channels.
· Equipped with cold dryer,
multi-stage filtration, pure gas Gas storage tank + compressor, stable airflow Thin tube air cutting, reduce production cost
· Special structural design, small body size, low running noise, and movable. Adopting special aluminum alloy impeller and Siemens three-phase motor, combining negative pressure and flow; stable operation, low failure rate and continuous operation. Set up the main switch of power supply, electric control components with thermal overload protection, phase loss and phase sequence protection, high safety, and can realize remote control and linkage control and other functions. Fire stop device is set at the air inlet to place sparks in direct contact with the filter cartridge and damage it. Pulse back-blowing device, good dust cleaning effect. Special air duct and noise reduction design to reduce the noise of the machine outlet.
cutting effect
frequently asked question
Do you have CE? We provide you with CE in the form of a one-stop service. At first, we will demonstrate CE to you. After delivery, we will give you CE packaging list a commercial invoice for customs clearance.
Please tell us about your following answer, our specialist will provide advice on proper power. 1. What material you want to cut, stainless steel, carbon steel or other? 2. What thickness do you want to cut?
If confronted with any problems, please contact us immediately and do not attempt to fix the machine by yourself or anyone else. We will respond within 24 hours as quickly as we can to help you.
2 years quality guaranty, the machine with main parts(excluding the consumables) shall be changed free of charge(some parts will be maintained) when if any problem during the warranty period.
Yes, we are happy to provide advice and we have dedicated technicians all around the world who are ready to assist you. Your operations’ continued success relies on your machines staying in working order.
Leave Message And Get The Answer
In order to improve the user experience and improve our production technology, JQ laser has been collecting real machinery handling questions and comments from the market, which we will analyze and provide answers to, and we will also adopt the favorable production ideas.
You may be interested in
