- Главная
- Plate Laser Cutting Machine
- Ultra High Power Laser Plate Cutting Machine JQ-2560HP
Ultra High Power Laser Plate Cutting Machine JQ-2560HP
There are many reasons to choose an Ultra High Power Laser Plate Cutting Machine JQ-2560HP over a traditional plate laser cutting machine. Here are just a few:
1. With an Ultra High Power Laser, you can cut through thicker and tougher materials with ease.
2. The JQ-2560HP is able to produce a higher quality cut, thanks to its precision engineering.
3. This machine is also much faster than a traditional plate laser cutter, meaning you can get the job done in a fraction of the time.
If you’re looking for the best possible laser cutter on the market, then you need look no further than the Ultra High Power Laser Plate Cutting Machine JQ-2560HP.
Technical Parameters
| Working area | 6000*2500mm |
| X-axis travel | 2550mm |
| Y-axis travel | 6050mm |
| Z-axis travel | 300mm |
| X.Y.Z axis position accuracy | ±0.05mm/m |
| Acceleration | 2.0G |
| Maximum running speed | 120m/min |
| Maximum table loading weight | 3000kg |
| Мощность лазера | 8000W-20000W |
| Power supply | 380V/50Hz |
Компоненты
Feature
The main use and scope of application of the product
JQ-2560HP is an exchange table closed fiber laser cutting machine developed by Jinqiang Laser for the actual needs of the sheet metal processing industry, the front and rear two platforms for rapid parallel exchange, greatly reducing the time used for loading and unloading, to improve processing efficiency.
It is mainly used for ordinary carbon steel plate, stainless steel plate, aluminum alloy plate, copper plate, etc. The cutting workpiece size is 2500X6000, and the maximum length is 6000mm.
The main composition of the product
The main components of JQ-2560HP series exchange platform laser plate cutting machine are: machine tool host, appearance protection system, control system, laser, water cooler, extractor fan, etc.
Основная деталь станка
The host part of the machine is the main component of the whole exchange platform laser cutting machine, the cutting function and cutting accuracy of the exchange platform laser cutting machine are realized by the host part, the host part is composed of plate welding bed, machine plus beam and Z-axis device, funnel drawer, exchange platform, auxiliary system (lubrication, gas and water), operating table and other parts.
Электрическая часть управления
Exchange platform laser cutting board machine electrical control system is to ensure that the various graphics running track of an important part of the general electrical control system is mainly composed of CNC system and low-voltage electrical system.
This machine tool CNC system configuration high-performance CNC system, the system is based on windows operating platform, stable and reliable operation, containing a 32-bit microprocessor; system has a fast interpolation operation speed, easy operation, good dynamic performance, strong load capacity and other characteristics.
Low-voltage electrical system
The low-voltage electrical system is located in the electric control cabinet, which is the interface part of the electrical control of the whole machine. All the original components of the electrical system are made by famous manufacturers at home and abroad to ensure that the machine is stable, reliable and responsive in operation. The drive motor is AC servo motor, AC servo motor for driving the machine tool X axis, Y axis, characterized by good acceleration performance, fast response speed, X,Y axis maximum positioning speed up to 120m/min; machine tool Z axis for the feed axis, using AC servo motor (with holding brake) drive: that is, Z axis cutting head, characterized by good dynamic response characteristics, both with the control and NC control.
Auxiliary peripheral equipment
Including water chiller, cold air system, exhaust system, etc.
Bed part
The bed is welded as a whole, treated by annealing to eliminate internal stress, and finished by vibration aging after rough machining, thus greatly improving the rigidity and stability of the machine tool and ensuring the accuracy of the machine tool. The Y-axis rack and linear guide are made of high precision products, which effectively ensure the accuracy of the transmission; the limit switches at both ends of the stroke are controlled, and the machine is equipped with a hard limit device, which effectively ensures the safety of the machine movement; the machine is equipped with an automatic lubrication device, which can be used at regular intervals. The machine is equipped with automatic lubrication device, which can add lubricating oil to the moving parts of the bed at regular intervals to ensure that the moving parts operate in good condition, which can improve the service life of guide rails, gears and rack.
X-axis machine crossbeam and Z-axis device
X-axis machine beam is roughly machined and then vibration-aged for finishing to ensure the rigidity and stability of the moving parts of the laser head. The bed is equipped with high quality linear guide rail, driven by servo motor, and the Z-axis slide plate is driven by high quality rack and pinion to achieve reciprocating motion in X direction. In the process of movement, the limit switch controls the stroke to limit, and at the same time there are elastic cushion mechanical limits at both ends to ensure the safety of the system operation.
Z-axis device
Z-axis device is mainly to realize the up and down movement of the laser head. The up and down movement of the laser head is controlled by the servo motor of the CNC system, which drives the linear module to drive the Z-axis slide plate up and down reciprocating motion to complete. The upper and lower ends are controlled by proximity switches to ensure the safety and reliability of the movement. The linear modules are made of high quality products to ensure the accuracy of transmission.
The Z-axis can be used as a CNC axis for its individual interpolation motion, while it can be linked with X and Y axes, and can be switched to the follower control to meet the needs of different situations. Since the Z-axis follower is also controlled by the CNC system, the accuracy of the follower is high and the stability is good, thus ensuring the quality of cutting.
After the capacitive sensor in the Z-axis device detects the distance from the nozzle to the surface of the plate, the signal is fed back to the control system, and then the control system controls the Z-axis motor to drive the cutting head up and down, thus controlling the constant distance between the nozzle and the plate and effectively ensuring the cutting quality. The cutting head can adjust the focus automatically or manually, and the position of the focus can be adjusted according to the material and thickness of the cutting material, thus obtaining a good cutting section.
Exchange platform
The exchange platform is mainly composed of support frame, knife strip frame, sprocket chain, etc. The horizontal movement of the upper and lower knife strip frames connected by the chain is mainly driven by the rotation of the sprocket, and there are rollers installed on the knife strip frame to ensure the smooth movement of the knife strip frame. The front and rear platforms can be exchanged in parallel quickly, which greatly reduces the time for loading and unloading and improves the processing efficiency.
There are many rows of knife strips on the knife strip frame, carrying flat plates.
Electrical control system
The electrical control system of JQ-2560HP series exchange platform laser plate cutter is mainly composed of Pakchu CNC system, servo system and
Low voltage electrical system. The laser cutting machine is equipped with high performance Pachu CNC system, which is a WINDOWS-based PC CNC system with fast interpolation and easy operation; the servo system is imported AC servo motor and driver, which is stable and reliable, with good dynamic performance, strong load carrying capacity and easy operation. The machine operation soft keys can have different functions in different operation modes, thus reducing the operation buttons and simplifying the operation panel. The operation functions are displayed by menus in various ways, making the operation intuitive.
cutting effect
frequently asked question
Do you have CE? We provide you with CE in the form of a one-stop service. At first, we will demonstrate CE to you. After delivery, we will give you CE packaging list a commercial invoice for customs clearance.
Please tell us about your following answer, our specialist will provide advice on proper power. 1. What material you want to cut, stainless steel, carbon steel or other? 2. What thickness do you want to cut?
If confronted with any problems, please contact us immediately and do not attempt to fix the machine by yourself or anyone else. We will respond within 24 hours as quickly as we can to help you.
2 years quality guaranty, the machine with main parts(excluding the consumables) shall be changed free of charge(some parts will be maintained) when if any problem during the warranty period.
Yes, we are happy to provide advice and we have dedicated technicians all around the world who are ready to assist you. Your operations’ continued success relies on your machines staying in working order.
Оставьте сообщение и получите ответ
Для того чтобы улучшить опыт пользователей и усовершенствовать наши производственные технологии, JQ laser собирает реальные вопросы и комментарии по обработке машин с рынка, которые мы будем анализировать и предоставлять ответы, а также мы будем принимать благоприятные производственные идеи.
