JQ-1530HP
Start off on the right foot
Plate cutting
Power available
6 – 12KW
1500KG
Working area: 3000*1500mm
X-axis travel: 1520mm
Y-axis travel: 3020mm
Z-axis travel: 1520mm
Ailenin en küçük üyesinde teknolojinin en iyisi
With the new Plate Cutter cutting head equipped on the JQ-1530HP, you will produce high quality parts. With automatic focus and integrated laser parameter management, there is no need for adjustments.
Sağlamlık ve her şeyden önce güvenilirliğe dayalı performans.
Ergonomik ve erişilebilir
Shipping solutions such as shipping in a container without removing sheet metal and beams
Improved bed anti-burning material: graphite plate changed to cast iron plate.
Cast iron plate installation is better than graphite plate. Cast iron is hung, while graphite plate needs to be installed and fixed by separate sheet metal;
The strength of cast iron is better than that of graphite plate. Cast iron is not easy to break and has a long service life, while graphite is easy to break and has a short cycle (30 yuan/KG);
Cast iron has a relatively high carbon content and is not easy to melt with ordinary slag. It is easy to clean slag and can be used repeatedly;
Cast iron has a relatively high residual value, while graphite plate can be almost ignored.
The bed structure adopts plate-welded box-type frame structure, rationally arranges rib plates, and adopts plug-in structure for key overlap. Strict welding process is formulated, and annealing and stress relief treatment are carried out to ensure the stability of the bed.
The rear bed adopts a connecting structure layout, which effectively improves the force-bearing characteristics while being lightweight, ensuring beauty, no sheet metal required, and simple and elegant.
En iyi seçimler zaman içinde değerini gösterir
The crossbeam is made of aviation-grade high-strength aluminum alloy, and the extruded aluminum profile structure adopts an outer square and inner circle + cross-partitioned composite structure. While being lightweight, each stress-bearing surface is individually provided with reinforcing ribs to extremely enhance the dynamic response of motion.
Table frame assembly:
Modular arrangement of knife bars;
Staggered arrangement of knife tips, providing effective three-point support;
High-power anti-burning cast iron bars, which increase service life and facilitate slag cleaning.
Lifting of the material cart:
The handle adopts a T-shaped mechanism, which is easy to push and pull with both hands, and is warped upward at the same time, which is convenient for workers to quickly get started;
The main structure of the box adopts an inverted “J” bend + horizontal channel steel design, which can effectively strengthen the structure and reduce thermal deformation;
The bed is equipped with a guide structure + limit baffle, which is easy to push and pull the material cart
Table frame locking and transmission optimization:
Using 2 high-rigidity gate locks;
The transmission adopts a double transmission shaft design to ensure effective torque transmission;
Design of flue:
The size of the partition dust removal opening is 120*400mm, and the ventilation area is +30%;
The flap valve is replaced, and the design without partition greatly reduces the wind resistance coefficient;
An L-shaped galvanized air duct is set on the back side of the bed, and the air duct outlet is set on the right rear side of the front bed, which is convenient for on-site installation.
Optimization of beam fixing method:
The original beam and slider were only connected by screws, without positioning design. V2.0 adds positioning and adopts fixed + floating positioning method to ensure the stability of high-speed movement.
Optimization of the Z-axis machine head:
The laser head connecting plate is thicker, has reinforcement ribs, and has optimized weight;
The sheet metal has added heat dissipation holes for the motor and electrical proportional valve;
The Z-axis has added volumetric quantitative lubrication.
Improved sheet metal protection:
The external sheet metal is sealed with the bed and all parts to separate the entire cutting area from the outside;
The rear side uses a contoured sheet metal lifting door to reduce the area of fireproof cloth, effectively prevent light leakage and increase service life;
Fiber optic plug-in-free design.
Değer yaratan yazılım paketi
Design of parts and frames in a three-dimensional graphical CAD/CAM environment designed to exploit every performance margin of the Laser plate.
Libraries of functions that speed up and simplify design on the plate.
Ayrıntılı bir tahmin için doğru parti süresi ve maliyet tahminleri.
Uzaktan planlama ve devam eden işlerin gerçek zamanlı izlenmesi.
Tüm bunlar ve daha fazlası, her gün bir araçtan tam olarak yararlanabilmek açısından fark yaratıyor. lazer kesim sistemiverimsiz duruş sürelerini azaltır ve israfı ortadan kaldırır.
Değer seçimi aynı zamanda yazılımı da içerir.
